Heating, Cooling & Indoor Air Quality in Boonville, IN

Completed comprehensive HVAC estimate for air conditioning system replacement due to non-operational 10-year-old unit that would not power on. Assessed existing basement installation, documented current furnace configuration with connected ductwork and plenum system, and captured detailed measurements and spatial requirements for new AC unit installation. The existing heating furnace was confirmed operational and requires no service at this time.

Completed Gold Level annual maintenance inspection on residential HVAC system. Performed comprehensive examination of control board, electrical connections, gas valve assembly, and blower components, documenting equipment condition with photos of manufacturer data plate and internal components. All system components found operating within normal parameters during this first annual service visit.

Completed comprehensive HVAC system replacement estimate for municipal contractor requiring outdoor condensing unit replacement. Verified existing Carrier furnace system non-operational with customer declining repair option in favor of full outdoor unit replacement. Documented existing basement installation including furnace configuration, venting system, PVC condensate drainage, and current mechanical room layout through photographic documentation to facilitate accurate equipment specifications and installation planning for municipal approval process.

Completed comprehensive plumbing repairs including replacement of leaking tub hardware, rebuilding toilet flush mechanisms in multiple bathrooms, and installing new shut-off valves in two rooms to improve water control and accessibility. Diagnosed and resolved low water pressure issues throughout the residence, restoring proper flow to all fixtures.

Completed platinum-level preventive maintenance on a one-year-old residential HVAC system during the second annual visit. Inspected and serviced indoor air handler unit and outdoor condensing unit, replaced 20x25x5 air filter, verified proper airflow through ductwork connections, and confirmed all electrical connections and refrigerant lines were secure. System operating within manufacturer specifications with all components functioning properly.

Completed annual planned maintenance visit on Lennox HVAC system. Performed comprehensive inspection of indoor air handler unit and outdoor condensing unit, verified all electrical connections and components including capacitor and contactor are functioning properly, checked refrigerant levels, and inspected ductwork insulation. System operating within normal parameters with no issues identified at this time.

Completed comprehensive Platinum Level planned maintenance on dual Lennox air conditioning systems, both approximately 3 years old. Performed full system inspections including cleaning condenser coils, checking refrigerant levels and pressures, testing electrical connections and capacitors, verifying proper airflow, and replacing air filters (20x25x5 and 16x25x5). Both outdoor units showed good operational condition with proper installation on vibration-dampening pads and adequate clearance for airflow. Verified all safety controls, tested thermostat operation, and confirmed both systems are cooling efficiently with no issues detected. This represents the second annual visit for these systems, with maintenance contract renewal confirmed for continued service coverage.

Completed annual Platinum Level planned maintenance on dual HVAC system installation. Performed comprehensive inspection and servicing of both units, including Lennox furnace and air handler components. Replaced 25x25x5 and 16x25x5 filters, inspected condensate pump operation, verified proper drainage through PVC condensate lines, and checked refrigerant line insulation integrity. Examined all electrical connections, tested safety controls, and confirmed proper airflow through metallic ductwork. Verified water heater and mechanical room components for clearance and safety compliance. All systems operating within manufacturer specifications upon completion of first annual maintenance visit.

Completed second annual Platinum Level maintenance on a 5-year-old HVAC system. Replaced 16x25x4 air filter and performed comprehensive inspection of all system components. Verified proper operation of CoreSense Diagnostics module and electrical connections within the condensing unit, including capacitors and control wiring. Measured supply air temperature at 50.5°F, confirming adequate cooling performance. Inspected ductwork in attic space and checked all electrical terminals for secure connections. All components operating within normal parameters. System is due for service plan renewal.

Completed full HVAC system installation of a 2.5-ton, 14 SEER air conditioner with 97% AFUE furnace as an upsell from service call. System was properly commissioned with refrigerant pressures verified using digital manifold gauges, temperature splits confirmed within manufacturer specifications, and all operational parameters tested to ensure optimal performance.

Conducted site assessment for geothermal HVAC system replacement, evaluating existing electrical infrastructure including main breaker panel and current outdoor condensing unit positioned on concrete pad with proper drainage. Documented equipment specifications, electrical service capacity, and installation requirements; provided comprehensive estimate for complete geothermal heat pump system installation with necessary electrical upgrades and ground loop configuration.

Completed second preventive maintenance visit on 6-year-old HVAC system under Platinum Level service agreement. Performed comprehensive system inspection, replaced two 16x20x1 air filters, checked electrical components and amperage readings using calibration equipment, and verified proper system operation. Customer requires service agreement renewal for continued coverage.

Completed comprehensive HVAC load calculation analysis for residential property, determining heating requirement of 60,952 BTUh with 792 CFM airflow and cooling requirement of 38,875 BTUh (32,618 sensible, 6,257 latent) with 1,450 CFM airflow. Documented site conditions with photos and provided detailed estimate for system replacement, pending customer financing approval for project to proceed.

Completed annual Platinum Level maintenance on 4-year-old HVAC system during second scheduled visit. Performed comprehensive system inspection including temperature diagnostics using infrared thermometer on air handling components and ductwork, verified proper airflow through supply and return plenums, and documented temperature differentials across system components. Inspected PVC condensate drain lines in overhead installation, confirmed proper drainage and secure mounting. System operating within normal parameters with all measurements recorded for service history.

Completed annual platinum-level preventive maintenance on single HVAC system recently installed in January 2026. Performed comprehensive inspection of thermostat control system, verified proper operation and documented system information including model number 108296-01 and current software revision 440.04i3. Inspected condensate drain lines and mechanical components in utility area, confirmed proper installation and secure mounting of all PVC piping, ductwork, and electrical connections. Collected filter measurements for future service requirements. System operating within normal parameters with no issues identified during first scheduled maintenance visit.

Completed electrical installation for new pool equipment system. Installed conduit and wiring from green electrical control box mounted on exterior brick wall to pool filtration equipment, including connections for sand filter tank with black valve assembly and manifold piping system with multiple ball valves. All electrical connections made to code specifications to support pool pump and filtration system operation.

Completed second annual Gold Level maintenance visit on 4-year-old HVAC system. Performed comprehensive diagnostic testing including temperature differential measurements and electrical readings, which showed 5.92 on multimeter during capacitor and voltage checks. Inspected condenser coil and heat exchanger components, verified system operation, and documented equipment condition with photos. System operating within normal parameters and ready for continued service.

Completed annual planned maintenance on residential package HVAC unit located on exterior pad. Performed comprehensive system inspection including refrigerant lines, electrical connections, and condensate drainage. All components found operating within normal parameters with no deficiencies noted during this first visit of the annual service agreement.

Completed first visit of quarterly planned maintenance on HVAC system with 17x21x5 filter specifications. Accessed furnace unit, verified proper installation positioning using level measurement tool, and documented equipment condition with manufacturer labels and service documentation clearly visible in compartment. Unit operating within normal parameters with all safety labels intact and accessible.

Completed first scheduled maintenance visit under three-month preventive maintenance agreement. Performed comprehensive system inspection including control board evaluation, verified all electrical connections and wire harnesses were secure, and confirmed system levelness using precision measuring tools. All components found operating within normal parameters with no deficiencies noted.