Heating, Cooling & Indoor Air Quality in Boonville, IN

Completed Platinum Level monthly maintenance on single HVAC system. Performed comprehensive system diagnostics using clamp meter to verify electrical performance, recording amperage and voltage readings at the outdoor unit. Inspected and documented electrical connections, refrigerant line conditions, and all wiring terminations within the service panel. Verified proper operation of all system components. Checked and documented the 16x20x4 air filter installation in the attic filter housing, confirming proper airflow direction and filter fit. All system parameters found within normal operating specifications, and unit is functioning as designed.

Completed Platinum Level maintenance on a 7-year-old single HVAC system during the second annual visit. Performed comprehensive inspection of furnace unit including heat exchanger, blower motor assembly, refrigerant lines, and electrical components. Replaced 20x20x2 air filter, verified all connections and wiring, and confirmed system operational status. All components found to be intact and functional with normal operational wear. Customer due for service agreement renewal.

Completed first scheduled three-month maintenance visit for commercial furnace installation (CFI). Performed comprehensive system inspection including verification of control board operation, electrical connections, and structural mounting alignment. All components found to be functioning within normal parameters with proper vertical alignment confirmed on mechanical equipment installation.

# HVAC Maintenance Report Completed comprehensive Platinum Level preventive maintenance service on a three-system residential HVAC installation. Performed thorough inspection and servicing of all outdoor condenser units, including a Lennox system and two additional units positioned at separate locations around the property. Conducted complete system diagnostics on each unit, checking refrigerant pressures, electrical connections, and component operation. Cleaned condenser coils using appropriate equipment to remove debris and ensure optimal heat transfer efficiency. Inspected and tested all electrical disconnects and verified proper voltage and amperage readings across all three systems. Evaluated refrigerant line insulation integrity and checked for any signs of wear or damage on copper line sets. Verified proper drainage from condensate systems and ensured all mounting pads were level and stable. Tested capacitors and contactors for proper operation on each unit. Documented filte

Conducted comprehensive electrical assessment for standby generator installation at recently purchased residential property. Evaluated existing all-electric service with dual electrical panels in basement utility area, documenting current breaker configuration, available capacity, and conduit routing for future generator integration. Provided detailed estimate for generator system installation including transfer switch placement, load calculation for essential circuits, and electrical service modifications required to accommodate propane-fueled backup power system once fuel source is established on property.

Completed scheduled air conditioning tune-up and preventative maintenance on residential AC system. Performed comprehensive system inspection, measured supply air temperature at 76.2°F at plenum, verified proper airflow through ductwork, and assessed outdoor condenser unit operation. All components found operating within normal parameters with no deficiencies noted at time of service.

Responded to no-cooling complaint on residential HVAC system with inadequate airflow and inability to maintain setpoint temperature. Upon inspection, found system running continuously with thermostat reading 75°F while set to 70°F and minimal airflow at registers. Diagnosed restricted airflow condition affecting cooling capacity and system performance, requiring further evaluation of ductwork, blower motor operation, and potential refrigerant circuit issues common in aging equipment.

Responded to service call regarding ongoing condensation issues on previously wrapped ductwork in basement mechanical space. Upon inspection, found that existing insulation wrap had become saturated with trapped moisture, causing sagging and water leakage from the duct system. Documented current condition of ductwork, insulation, and surrounding area including exposed ceiling joists and utility infrastructure. Assessed three-year-old HVAC system for proper operation and identified inadequate moisture barrier installation as contributing factor to continued condensation problems.

Responded to no cooling complaint on residential HVAC system. Upon inspection, diagnosed failed blower motor preventing air circulation through the system. Ordered replacement blower motor to restore proper airflow and cooling operation, with estimated repair time of 120 minutes upon part arrival. System is currently non-operational until replacement component is installed. Customer payment collected in full with zero balance remaining.

Completed annual Gold Level planned maintenance on 3-year-old mini-split system. Performed comprehensive inspection of outdoor condenser unit, noting dirt and debris accumulation on cooling coils behind protective wire guard. Took temperature differential readings at indoor air handler, recording supply air temperature of 58.6°F and return air temperature of 77.1°F, confirming proper cooling performance with 18.5°F temperature split. System operating within normal parameters with no immediate service requirements identified.

Responded to follow-up service call for HVAC system reported as not maintaining desired temperature during extreme heat conditions. Performed comprehensive inspection of unit's electrical control panel and wiring systems in attic installation. Verified all wire connections at terminal blocks, inspected control board components including capacitors and relays for proper operation, and documented system configuration with photos of control panel and wiring harness. All electrical connections found secure with no signs of loose terminals or damaged conductors. System scheduled for additional evaluation during next available service window to monitor performance under continued high ambient temperature conditions.

Responded to no-cool call on 12-year-old system located in garage. Upon arrival, found Nest thermostat displaying "no system detected" error with fan running intermittently but system cycling and shutting off without producing conditioned air. Verified electrical supply at breaker panel showed no tripped breakers. Accessed control board assembly and identified failed furnace control board preventing proper system communication and operation. Documented control board model information and captured photographs of existing board, wiring configuration, and terminal connections for part ordering purposes. Furnace control board requires replacement to restore system functionality. System remains non-operational pending part arrival and installation.

Conducted follow-up site visit to assess previously incomplete work and document current system conditions. Inspection revealed significant frost accumulation on refrigerant line with deteriorated insulation, indicating potential refrigerant flow issues or inadequate insulation coverage. Photographed insulation materials and affected copper piping with ice buildup for documentation and future reference.

Completed Platinum Level annual maintenance on a 2-year-old Lennox HVAC system consisting of indoor air handler and outdoor condensing unit. Performed comprehensive inspection of indoor unit located in utility room, including examination of all electrical connections, refrigerant lines, and PVC condensate drainage system. Replaced 20x25x5 air filter per maintenance protocol. Inspected ductwork and noted minor wear to insulation wrapping on supply plenum. Evaluated outdoor condensing unit positioned on composite pad with proper clearances maintained from landscaping. Verified electrical disconnect functionality, checked refrigerant pressures, and confirmed proper airflow through condenser coil. Cleaned condenser coil fins and removed debris from unit perimeter. Tested system operation through complete cooling cycle, confirming proper startup sequence, temperature differential, and overall performance within manufacturer specifications. All components functioning as designed with no imme

Conducted comprehensive assessment of seventeen-year-old Lennox residential air conditioning system for replacement estimate. Evaluated outdoor condenser unit positioned on concrete pad and indoor vertical air handler installed in utility closet, documenting equipment specifications, installation configuration, electrical connections, and condensate drainage system to provide accurate replacement system recommendations.

Conducted comprehensive HVAC system replacement estimate for existing customer with operational system seeking upgrade options. Evaluated current downflow furnace and Amana air handler configuration in basement utility space, documenting equipment specifications, clearances, and installation parameters. Assessed ductwork arrangement, base condition, and spatial requirements for high-efficiency AC/HP system compatibility, providing detailed replacement recommendations and configuration options for complete system upgrade.

Installed ADA-compliant elongated toilet in residential bathroom corner location. Completed two-piece toilet installation with proper mounting, wax ring seal, water supply connection, and tank assembly with chrome flush lever. Verified proper operation and tested for leaks.

Completed planned monthly HVAC maintenance on 13-year-old system with 20x25x5 filter configuration. Performed electrical diagnostics using digital clamp meter, recording amperage reading of 19.85 amps at outdoor condensing unit. Conducted comprehensive system inspection of both indoor and outdoor equipment, documenting equipment condition and operational parameters with diagnostic instruments.

Provided estimate for conversion of existing tub/shower combination to stand-alone shower unit at residential property. Assessed current bronze-framed glass enclosure and white bathtub with failing fixtures experiencing continuous dripping issues. Presented cost-effective options for shower-only installation in same location, including fixture replacement recommendations and enclosure modifications to address deteriorating components while minimizing structural changes.

Completed installation of 3.5-ton, 13 SEER air conditioning system with matching evaporator coil in residential basement mechanical room. The new AC system was integrated with the existing Goodman furnace unit, with the evaporator coil installed in the supply plenum above the furnace. All refrigerant lines were properly sized and insulated, condensate drainage was routed through white PVC piping with appropriate trap installation, and electrical disconnect was verified for safe operation. System was pressure tested for leaks, evacuated to manufacturer specifications, charged with proper refrigerant amount per unit nameplate, and tested for correct operation including temperature split verification across the coil.