Heating, Cooling & IAQ in Jeffersontown

Completed follow-up site visit to inspect and document previously incomplete HVAC installation work. Photographed mechanical room equipment including furnace/boiler unit with visible manufacturer labels, warning decals, gas connections with brass fittings and yellow tag, copper tubing, PVC condensate drain line showing discoloration, and associated plumbing components to verify installation status and identify remaining work requirements.

Responded to install callback for Lennox furnace system with fan running continuously but no heating or cooling output. Upon inspection, diagnosed faulty control board preventing proper system operation and heating/cooling cycles. Replaced defective control board, verified all wire connections, tested system operation through complete heating cycle, and confirmed proper fan cycling and temperature control restored to normal function.

Installed a new 40-gallon tall gas water heater manufactured by Bradford White in the utility closet. Connected copper supply lines with dielectric unions to prevent galvanic corrosion, installed proper shut-off valves including gas isolation valve, and vented the unit with galvanized metal flue pipe per code requirements. All plumbing connections were tested and verified leak-free, and the unit was commissioned successfully.

Completed comprehensive HVAC system evaluation for heat pump replacement estimate at residential property. Performed refrigerant leak detection assessment on primary heat pump system and conducted full inspection of secondary garage unit. Documented equipment specifications and measurements of existing Carrier furnace unit and Bradford White water heater (dated 2-10-15) to determine replacement requirements and clearance specifications. Provided detailed replacement estimate with equipment recommendations based on current system age and operational status.

Performed comprehensive refrigerant check and leak detection on residential Payne heat pump system. Connected manifold gauge set to outdoor condensing unit and verified system pressures and refrigerant charge levels. Conducted visual inspection of unit, line set, and connections for signs of refrigerant leakage. System found to be operating within normal parameters with no leaks detected at time of service.

Completed PTAC unit replacement at property. Removed existing unit and installed new PTAC system, verifying proper electrical connections and refrigerant line integrity. Performed temperature differential measurements across the unit using calibrated digital instruments, confirming supply air temperature of 91°F and proper system operation upon startup.

Responded to bathroom sink clog complaint and successfully cleared the drain obstruction. Upon inspection, found standard P-trap configuration with chrome two-handle faucet assembly; noted aging fixtures with visible corrosion on supply valves and general wear throughout plumbing components. Restored proper drainage function and completed service.

Completed follow-up maintenance visit to verify system performance after previous service call. Performed diagnostic testing on HVAC unit, including capacitor testing with multimeter to confirm proper electrical function and system charging levels. Verified thermostat operation showing system actively cooling from 78°F to setpoint of 75°F. Confirmed unit running properly with all components functioning as designed.

Evaluated 12-year-old wall unit with no cooling capability. Performed measurements and assessment of existing HVAC equipment, documented condensation present on ductwork and metal surfaces indicating temperature differential issues. Provided estimate for complete system replacement due to age and failure of cooling function.

Successfully completed installation of a humidifier, connecting the water supply line to the existing plumbing system. Installed a quarter-turn shut-off valve with braided stainless steel supply line and secured proper connection of blue flexible feed line to the humidifier unit. All connections were tested and verified for proper operation with no leaks.

Successfully installed RED Full System with Polarized Filter, including proper leveling of all components according to manufacturer specifications. Mounted outdoor condenser unit on appropriate pad with proper clearances, connected insulated refrigerant lines, and secured all electrical connections to junction boxes. Verified system operation and ensured all components were functioning correctly before completion.

Replaced 15+ year old inoperative heating system with new XE 90 furnace installation in basement utility area. Complete system replacement included new ductwork connections, PVC venting, and integration with existing humidifier. Installation verified proper function of all components with comprehensive testing of the new heating system.

Diagnosed no-heat condition on 15+ year old HVAC system. Performed comprehensive inspection of aging equipment, including thermostat functionality check and outdoor unit assessment. Recommended replacement due to system age and wear patterns observed on condenser components.

Performed comprehensive tune-up on residential HVAC system, including inspection of outdoor AC condenser unit and furnace/air handler in utility room. Cleaned condenser coils, checked refrigerant levels, verified proper electrical connections, and inspected gas line connections to ensure safe operation. All components functioning within normal parameters; system is now operating at optimal efficiency.

Performed scheduled platinum-level maintenance service on a Goodman HVAC system, which included inspection of the blower motor assembly, verification of electrical connections (yellow, red, blue, and white wires), and examination of control board functionality. Documented system components with photos for service records and confirmed proper operation of all mechanical parts; system is functioning within specifications.

Completed Platinum Level maintenance on residential HVAC system. Replaced 16x25x1 filter as part of monthly service plan and performed temperature differential testing to verify proper system operation. System is functioning within normal parameters.

Diagnosed 5-year-old Trane HVAC system with complete non-operation and no airflow. Inspection revealed failed circuit board causing system failure. Replaced control board and verified proper system operation, restoring heat to downstairs zone.

Responded to no heat call for 2-year-old system where homeowner reported thermostat set to 72°F with home temperature at 59°F and no airflow. Diagnostic inspection revealed tripped circuit breaker; reset breaker and verified proper operation of gas burners and control board. System now functioning normally with consistent blue flame pattern and proper airflow throughout home.

Conducted generator installation assessment at residential property with natural gas availability. Evaluated electrical service panel in basement/utility area for generator integration capability. Customer requires backup power for critical loads including HVAC, refrigerator, TV, and essential lighting circuits in living room, kitchen and bedrooms.