Trusted HVAC, Plumbing & Electrical Services in Santa Claus – Solutions That Work

Installed NPE 240 tankless water heater in residential utility closet, mounting unit to wall and connecting white PVC venting pipes with proper exhaust and intake configuration. Completed all plumbing connections, electrical hookup, and verified unit operation with display panel showing active status, ensuring proper clearances from adjacent HVAC equipment and washing machine in compact mechanical space.

Conducted comprehensive HVAC system replacement estimate for residential property. Evaluated existing multi-zone heating and cooling system including Trol-A-Temp zone control panel with five-zone capability, assessed current equipment configuration and installation space constraints in mechanical area. Documented existing system components, zoning controls, and equipment placement to provide accurate replacement recommendations and ensure proper sizing for new system installation.

Responded to emergency call for leaking 30-gallon gas water heater. Upon arrival, water supply had been shut off to stop active leak. Performed comprehensive assessment of existing tanked water heater, documenting unit condition, age indicators, copper supply line connections, gas venting configuration, and overall installation setup. Provided professional estimate for water heater replacement options and discussed solutions with homeowner present during consultation.

Responded to callback for non-operational system installed by another technician. Upon arrival, performed diagnostic assessment of HVAC unit including supply air temperature verification at register, which measured 129°F indicating proper heat production. Inspected ECM blower motor control board and verified all wire terminations, 24VAC connections, and control circuit integrity. System found to be operating within normal parameters with adequate airflow and temperature output. Reviewed thermostat operation with occupant and confirmed proper system function before departure.

Completed four-month planned maintenance inspection on HVAC system. Performed comprehensive system evaluation including verification of condensate drain line alignment, inspection of electrical connections and wiring harnesses, and assessment of ductwork condition. All components found to be operating within normal parameters with proper drainage alignment confirmed.

Completed annual planned maintenance on HVAC system with 16x25x5 filter configuration. Performed comprehensive inspection of air handler unit and associated components including electrical connections, condensate drain system, and overall equipment operation. Verified proper installation alignment, checked all wire connections and terminations, and confirmed condensate drainage piping integrity. System found to be operating within normal parameters with no immediate service needs identified.

Completed scheduled three-month planned maintenance visit on HVAC system, including installation of 16x25x5 filter and thorough inspection of iWave-R air purification system as requested. Verified iWave-R control board functionality, checked all electrical connections and sensor terminals, and confirmed proper operation with digital multimeter readings showing system within normal parameters.

Responded to a second opinion service call for an older HVAC system, approximately 1997 model, where a previous contractor indicated the thermostat was wired incorrectly. Performed diagnostic assessment of the furnace and air distribution system located in the basement utility area, inspecting thermostat wiring, furnace operation, and ductwork configuration. Documented existing equipment conditions including the furnace unit, metallic ductwork routing, flexible ducting connections, and overall system installation for evaluation and recommendation purposes.

Completed annual Platinum Level planned maintenance on a two-system residential HVAC installation. Performed comprehensive inspection and maintenance procedures on both units, including the upstairs system recently installed in December 2025. Verified system operation through temperature measurements at ductwork, confirmed proper thermostat functionality and settings on smart thermostat (Model 10708B-01), and replaced 20x20x5 filters as part of routine maintenance protocol.

Conducted comprehensive HVAC system evaluation for complete equipment replacement at residential property with non-functional upstairs air conditioning unit and aging outdoor equipment. Assessed attic space containing existing ductwork and insulation conditions, noting flexible duct routing and structural access points for future installation. Evaluated exterior condensing units showing significant rust deterioration and weathering, indicating end-of-service-life conditions requiring replacement. Provided estimates for complete HVAC system upgrade including new heating and cooling equipment, thermostat replacements, and integration solutions to connect upstairs and main level climate control systems into cohesive whole-home comfort solution.

Completed comprehensive estimate for full HVAC system replacement on residential property with over 15-year-old equipment. Evaluated existing furnace and air conditioning system in utility room where blower motor had failed due to improperly wired ecobee thermostat causing continuous operation. Assessed current equipment configuration including ductwork connections, PVC venting, and electrical wiring to determine replacement specifications and provided detailed quote for new heating and cooling system installation.

Responded to water leak reported under kitchen floor near stove area. Upon arrival, conducted thorough inspection of affected flooring and surrounding areas. Investigated potential water sources including kitchen appliances and plumbing connections. Traced leak origin to tankless water heater installation located in adjacent utility space. Inspected water heater unit displaying 130°F operating temperature with copper supply lines and PVC exhaust venting. Examined all plumbing connections, pressure gauge, and pipe routing for signs of active leakage or moisture infiltration. Assessed laminate flooring damage in kitchen area adjacent to stove and wall oven installation. Performed diagnostic evaluation of water heater inlet/outlet connections and associated copper piping. Documented conditions with photographs for reference. Provided assessment of leak source and recommendations for necessary repairs to prevent further water damage to kitchen flooring.

Conducted follow-up site visit to inspect and document existing HVAC and plumbing installations in mechanical room. Photographed furnace/air handler unit, water heater, PVC drainage piping, copper refrigerant lines, condensate pump assembly, and floor drain configuration to verify proper installation and system operation. All equipment observed in normal working condition with standard connections and compliance labeling intact.

Successfully installed an 18,000 BTU mini split system (1:1 configuration) on a brick exterior wall. The outdoor condenser unit was properly mounted on a concrete pad with appropriate clearances, and line set was routed along the wall using white PVC line hide for protection and aesthetic finish. System was pressure tested, evacuated, and charged according to manufacturer specifications, with final commissioning confirming proper operation.

Successfully completed installation of a tankless water heater system in utility closet. Installation included proper mounting of unit to wall, connection of copper supply lines with shut-off valves, and installation of PVC venting. All connections were tested and system is functioning optimally.

Successfully installed a complete 3-ton HVAC system, including indoor furnace unit with PVC exhaust and outdoor condensing unit. System was properly connected to existing ductwork, with all electrical components wired according to manufacturer specifications and local code requirements.

Conducted comprehensive evaluation of aging outdoor HVAC system showing significant deterioration including extensive rust on fan assembly, weathered housing, and corrosion on adjacent components. Unit positioned against brick exterior wall exhibits end-of-life indicators and requires full system replacement as discussed with customer who is interested in the tankless water heater promotion with complete system installation.

Diagnosed and repaired a continuously running toilet by replacing the internal flush valve assembly. Removed tank lid to access internal components, inspected the flush mechanism, and installed new parts to resolve the water waste issue. Customer was informed about the BOGO toilet offer for future consideration.

Successfully installed a new tankless water heater (model 210A), ignited and verified proper furnace operation, and inspected the requested line set fitting (1/2 to 1 inch). All connections were properly secured and tested for leaks, ensuring optimal system performance.

Installed new Lennox EL16XCV-036-230B04 complete HVAC system with outdoor condenser unit mounted on concrete pad adjacent to brick exterior wall. System includes proper refrigerant line connections, electrical wiring, and drainage setup with PVC drain pipe. Unit was tested and verified to be functioning according to manufacturer specifications.